节省时间的模具和工具清洁剂
功能强大的配方快速轻松地清洁模具和工具。从模具，模具和机器中完全去除固化的聚氨酯，脱模剂和其他积聚物。仅用于钢铁，铝和其他金属工具。在使用之前，请始终测试兼容性
方向：使用前阅读完整标签。戴丁基橡胶手套和护目镜以保护皮肤和眼睛。用B510饱和模具，并让其浸泡。浸泡时间可能因模具的积聚程度和类型以及模具温度而异。让B510浸泡，直到用抹布或柔软部件清洁刷轻松将其擦干即可。困难的地方可能需要第二次使用，24小时浸泡或用软清洁刷或抹布擦洗。用碎布清除多余的清洁剂或让其风干。 B510是一种强力清洁剂，可能对某些塑料，油漆或其他敏感材料有害。使用之前，请在小范围内进行测试。使用后，立即让B510在通风良好的地方从布或其他涂药器中蒸发，远离火源。按照当地，州和联邦法规处理碎布或涂抹器在金属容器中。
危险：易燃性请远离阳光，热源，火花或明火。保持容器阴凉，干燥，远离火源。保持容器密闭。眼睛刺激素。穿戴皮肤和保护眼睛。避免接触眼睛，长时间或反复接触皮肤。如果吞咽有害或致命。不要摄取。仅限工业用途。请将本品放在儿童不能接触的地方。使用前，为了获得更具体的健康和安全信息，请务必参考您的雇主或Stoner，Inc.提供的该产品的材料安全数据表。包含：NJ Trade Secret Registry＃80100382-5054P;二甲苯，CAS＃1330-20-7; NJ Trade Secret Registry＃80100382- 5055P;石油馏分，CAS＃8052-41-3 ;.
急救如果被蒸气冲走，请将人从受污染的地方移走。立即致电医师。为了眼睛接触，用水彻底冲洗15分钟。立即致电医师。对于皮肤接触，请用温肥皂水彻底清洗。立即脱掉受污染的衣物并在再次使用前清洗如果吞下了，不要试图催吐。立即致电医师。
火灾：用干燥的化学物质，二氧化碳或泡沫灭火。
溢出物：用惰性吸收材料吸收。按照当地的收集和处理，
州和联邦法规。

其他信息：将本产品存放在阴凉，干燥，通风良好的区域。清空的容器保留蒸汽和产品残留物。切勿在该容器上或附近切割，钻孔，研磨或焊接。不要重复使用此容器。

TIME SAVING MOLD AND TOOL CLEANER
POWERFUL FORMULA cleans molds and tools quick and EASY. Completely removes cured polyurethane, mold release and other build-up from tooling, molds, and machinery. Use only on steel, aluminum and other metal tooling. Before using, always test for compatibility
DIRECTIONS: Read entire label before using. Wear butyl rubber gloves and safety goggles to protect skin and eyes. Saturate the mold build-up with B510 and allow to soak. Soaking time may vary depending on degree and type of build-up as well as temperature of mold. Allow B510 to soak in until build-up easily wipes away with a rag or soft parts cleaning brush. Difficult areas may require second application, 24 hours of soaking, or scrubbing with soft cleaning brush or rag. Remove excess cleaner with a rag or allow to air dry. B510 is a strong cleaner which may be harmful to certain plastics, paints, or other sensitive materials. Always test in a small area before using. Immediately after use, let B510 evaporate from cloths or other applicators in a well ventilated area, away from sources of ignition. Dispose of rags or applicators in a metal container in accordance with local, state, and federal regulations.
DANGER: FLAMMABLE Keep away from sunlight, heat, sparks, or open flame. Keep container cool and dry, and away from sources of ignition. Keep container tightly closed. EYE IRRITANT. Wear skin and eye protection. Avoid contact with eyes and prolonged or repeated contact with skin. HARMFUL OR FATAL IF SWALLOWED. Do not ingest. For industrial use only. Keep out of reach of children. Before using, for more specific health and safety information, always refer to the Material Safety Data Sheet for this product available from your employer or Stoner, Inc. Contains: NJ Trade Secret Registry #80100382-5054P; xylene, CAS# 1330-20-7; NJ Trade Secret Registry #80100382- 5055P; petroleum distillates, CAS# 8052-41-3;.
FIRST AID If overcome by vapors, remove person from contaminated area. Call physician immediately. For eye contact, flush thoroughly with water for 15 minutes. Call physician immediately. For skin contact, wash thoroughly with warm soapy water. Remove contaminated clothing immediately and wash before reuse. If swallowed, do not induce vomiting. Call physician immediately.
FOR FIRE: Extinguish with dry chemical, carbon dioxide, or foam.
FOR SPILL: Soak up with inert absorbent material. Collect and dispose of in accordance with local,
state, and federal regulations.
ADDITIONAL INFORMATION: Store this product in a cool, dry, well-ventilated area. Emptied container retains vapor and product residue. Do not cut, drill, grind, or weld on or near this container. Do not reuse this container.