M615
硬发泡聚氨酯脱模剂
Stoner®M615聚氨酯脱模剂是一种多功能，无硅释放剂，旨在释放硬质泡沫和铸塑聚氨酯。 模内涂层也可提供优异的结果。 无硅配方与许多涂料相容，导致部件清理不足。

 

M615聚氨酯脱模剂优点：

由于积聚较少，所以模具运行时间更长。
由于非硅胶配方造成的废品少。
由于闪点在正常室温下更安全的配方。
多功能版本通常可以用于现有设备。

由于无阻塞喷涂而提高生产力。

M615
Polyurethane Release
Stoner® M615 Polyurethane Release is a versatile, silicone free release designed to release rigid foam and cast urethane.  Also provides excellent results with in-mold coatings.  The silicone free formula is compatible with many coatings resulting in less clean-up of parts.

 

M615 Polyurethane Release ADVANTAGES:

More mold up-time due to low build-up.
Less scrap due to non-silicone formula.
Safer formula due to flash point about normal room temperature.
Versatile release can often be applied with existing equipment.
Better productivity due to clog free spraying.

产品描述
Stoner®M615聚氨酯脱模剂是一种多功能，无硅释放剂，旨在释放硬质泡沫和铸塑聚氨酯。模内涂层也可提供优异的结果。无硅配方与许多涂料相容，导致部件清理不足。
M615聚氨酯脱模剂优点：
由于积聚较少，模具运行时间更长。
•由于非硅胶配方，减少了废料。
•由于闪点正常，因此配方更安全
室内温度。
•多功能版本通常可以应用于
现有设备。
•由于无堵塞喷涂，生产效率更高。
用途
Stoner®M615聚氨酯脱模剂用于模塑这些材料：
存储和处理
有关完整的安全说明，请参阅MSDS。在通风良好的情况下使用，并远离其他火源。戴上手套和安全眼镜。
打包
Stoner®M615聚氨酯脱模剂有以下几种：
•硬发泡  •铸造聚氨酯
使用指南
推荐程序
最初涂2-3层轻涂层以保证均匀覆盖。释放应该使模具表面湿润，但在施加正确的量时不应该积聚或滴落。每部分后，涂上一层轻盈的涂层，使表面潮湿但不潮湿。
清洁：通过擦去温暖的工具或使用溶剂型清洁剂（如Stoner A497Non-Flamamble Cleaner或Stoner B510 Polyoff）可清除过量的M615。
Stoner®M615聚氨酯发布
•5加仑桶装和55加仑桶装•可根据要求提供手提袋

Product Description
Stoner® M615 Polyurethane Release is a versatile, silicone free release designed to release rigid foam and cast urethane. Also provides excellent results with in-mold coatings. The silicone free formula is compatible with many coatings resulting in less clean-up of parts.
M615 Polyurethane Release ADVANTAGES:
• More mold up-time due to low build-up.
• Less scrap due to non-silicone formula.
• Safer formula due to flash point about normal
room temperature.
• Versatile release can often be applied with
existing equipment.
• Better productivity due to clog free spraying.
Uses
Stoner® M615 Polyurethane Release is for molding these materials:
Storage and Handling
Refer to MSDS for complete safety instructions. Use with adequate ventilation and keep away from sparks to other ignition sources. Wear gloves and safety glasses.
Packaging
Stoner® M615 Polyurethane Release is available in:
• Rigid Foam
Direction for Use
Recommended Procedure
• Cast Urethane
Initially apply 2-3 light coats to assure even coverage. Release should wet mold surface but should not pool or drip when applied at the correct amount. After each part, apply a light touch –up coat, making surface damp but not wet.
Cleaning: Excess M615 can be removed by wiping off a warm tool or with a solvent based mold cleaner such as Stoner A497Non-Flamamble Cleaner or Stoner B510 Polyoff.
Stoner® M615 Polyurethane Release
• 5-gallon pails & 55-gallon drum • Totes available upon request